Anatomy of the Pelvis – for Artists

Anatomy of the Pelvis – for Artists

Anatomy of the Pelvis
Hello, in this episode of Proko we’re going to learn the anatomy of the Pelvis. We’ll
explore the structure of the parts, the difference between a male and female pelvis, and how
to simplify the structure to make it manageable to draw.
Let’s take a look at the Parts of the Pelvis. The Parts of the Pelvis
The 2 hip bones, along with the sacrum and coccyx of the spine form what’s known as the
pelvis. Each hip bone consists of 3 parts. These 3 parts actually start out as 3 separate
bones at birth and fuse together throughout puberty. On the top half stands a wing-like
wall called the ilium. Under the ilium, in the front is the pubis. And behind the pubis
is the ischium. You can remember that there’s all sorts of “icky” stuff that happens
in the ischium. These 3 bones fuse together right in the middle
of the acetabulum – a deep socket of the ball and socket joint of the hip. The femur sits
right in there and rotates in all directions to move the leg. Ilium
The Ilium is the largest of the 3 parts. The 2 curved walls converge in the back, connected
by the sacrum. The part of the ilium that is visible in the surface is the top edge
known as the iliac crest, so let’s take a closer look at it.
The iliac crest starts in the front at the ASIS, that’s Anterior Superior Iliac Spine
. And it ends in the back at the PSIS or Posterior Superior Iliac Spine. Dont miss this. I mention
these two landmarks a lot. And I use them a lot when drawing the figure.
From top view, the crest curves outward from the ASIS for a short distance to the tubercle.
Then curves back for a longer distance, and then almost straight backward for a short
distance to the PSIS. From side view, the crest creates a half circle
arc. This arc shape will vary, from a smooth curve in some people, to a sharp corner at
the top point in other people. This high point is somewhat back from center. Men tend to
have a more angular high corner, while women have a smoother curve. Only the front 1/4 of the crest is actually
visible on surface, starting from this tubercle. The rest is covered by the external oblique
muscle on the sides and flank fat in the back. Here’s a good example where you can clearly
see the ASIS in the front and the external oblique covering the side portion. On a more
muscular or overweight body type, it appears as a sharp edge, indicating the bottom border
of the external oblique. If the torso bends laterally, the external oblique is stretched
up, sometimes exposing the middle section of the crest. On a very lean person, the ASIS
pokes out as a visible protrusion. It pokes out even farther when the spine is extended,
and the muscles around the ASIS are stretched. The visible portion curves downward and inward. Try to feel it on yourself..
In the back the Posterior Superior Iliac Spines are surrounded by muscles and flank fat. They
are usually seen as two dimples where connective tissue attached to the spines pull the skin
inward. You might see a subtle indication of the crest in men, though mostly softened
by the flank fat. In women it can be so softened that the hips appear to continue all the way
to the top of the waist. In some poses when a lean model stretches her back muscles, the
bones push out and appear as protrusions instead of a dimple. Pubis
Ok, let’s move on to the pubis. The two sides are joined by a cartilaginous disc at
the pubic symphysis. This is a commonly used landmark, but you won’t actually see a bony
point because it’s covered by pubic fat. You can find it by following the trail of
the inguinal ligament. A thin string-like ligament stretching from the ASIS to the pubic
tubercle just lateral of the pubic symphysis. It defines the lower border of the abdominal
mass called the “furrows of the groin” and appears deeper in men.
The pubic symphysis aligns with the level of the tailbone, although this varies. In
men, it’s also on the same vertical plane with the ASIS. Another useful alignment, is
the pubic symphysis tends to be the vertical center of the whole body.
In the back, the vertical center is between the bottom of the sacral triangle and the
bottom of the buttocks, right in the middle of where the glutes meet. Gender Differences
The pelvis has the most divergence between male and female of the entire skeleton. Mainly
because a female pelvis is built to allow a woman to give birth.
Skelly, I’d like you to meet, Skella! What makes Skelly so attracted to Skella’s
pelvis? Well, the female pelvis has lighter and thinner parts. It’s about 2 finger widths
wider and 2 finger widths shorter than a male pelvis. The walls of the ilium are more vertical,
but not as tall. The pelvis is tilted forward more on a female. The ASIS protrude forward
more and don’t align with the pubic symphysis. On a man, the ASIS and pubic symphysis align
on the same vertical plane. You might also notice that the pubic arch
is much wider on a female pelvis. About 120 degrees in women, but only 90 degrees in men.
This means that women’s ischia are farther apart. Creating a wider gap between the leg
muscles because the insertion points of the adductor muscles are farther. On a woman,
you might see a gap even if the legs are together. On a male, the gap is much smaller. Sometimes
there is no gap, even if the legs are separated. The widening of all these parts on a female
pelvis pushes the acetabula laterally, which in turn pushes the greater trochanters. These
differences, along with more fat distribution, account for why women have more prominent
hips. An average woman will have a higher body fat percentage than an average man, so
the baby doesn’t starve during hard times. Like the pelvis, the sacrum is also shorter,
wider, and curves posteriorly more. On the surface, this plane of the lower back is more
angled on a woman and more vertical on a man. The main reason for the wider female pelvis
is to create a larger inlet and larger outlet for a baby to pass through.
The inlet is this round shape here. Very round and wide on a female. On a male pelvis the
inlet shape is more like this. The outlet is the space between the bottoms
of the ischia and tailbone. You can see how everything is more spaced out on the female
pelvis, perfect for childbirth. Allow me to demonstrate. As you can see, the baby passes
through Skella’s pelvis quite easily. But with Skelly. Well…
To review, a male pelvis is characterized by height, weight, more vertical angle, thickness,
sharper angles, and a smaller cavity. A female pelvis is characterized by width, lightness,
forward tilt, thinness, and a larger cavity. Simplified Structure
As you can probably tell, the forms of the pelvis are quite complex. Trying to imagine
these forms from various angles let alone drawing them is very challenging. Let’s
take a look at a few ways we can simplify the pelvis to make it easier to construct
and pose the body. The relationship between the top half and
bottom half of the pelvis simplifies to 2 perpendicular planes. The Ilium generally
angles inward to the sacrum. The ischium and pubis together angle perpendicularly to that,
meeting at the pubic symphysis. From the side, It’s kinda like a figure 8. A twisted figure
8.. Bucket
Now, the method I’ll use a lot in this Anatomy course, is the bucket.. I like it because
starting the construction with a bucket allows us to get very accurate placements for the
landmarks. A bucket is basically a tapered cylinder.
This cylinder, in a neutral standing pose, is tilted forward, like the pelvis. It’s wider
at the top and narrower at the bottom. Also, the width is longer than the depth. So the
top and bottom caps are not perfect circles. This ellipse of the top cap is the first thing
I draw. It determines a lot of things. The width, the forward tilt, and the side to side
leaning. It’s also not too hard to find on the surface of a model. From the front, use
the ASIS points to determine the side to side leaning angle. Now, from the top you’ll notice
that this ellipse doesn’t really follow the shape of the iliac crest all the way. It does
for this middle portion but then the crest takes a sharp turn inward, leaving this extra
space.. Well, if you consider the muscles and flank fat in this area, this ellipse actually
follows the surface curve nicely! And in the front, the curve follows the form of the abs.
Of course, on an obese body, this won’t work as well. So, we’re looking just at this
portion of the iliac crest when drawing the top ellipse.
After I’ve established the ellipse, I’ll add the side planes. The length depends on how
much foreshortening there is caused by the tilt and our point of view. Longer lines when
there’s no foreshortening. And shorter lines when there’s a lot of foreshortening.
You also have to think about the gender differences. Remember, a female pelvis is wider and shorter
than a male pelvis. Finally, I’ll add the bottom cap and that
gives me a simplified form for the pelvis. There we have a simple representation of the
pelvis as a bucket. In the next lesson, I’ll show you how to break it down further to construct
the minor forms of the pelvis. In the meantime, fill a page with buckets from various angles.
Premium Anatomy students, you can login to your account and use the 3d model of the bucket
and pelvis as reference. Spin it around and draw the bucket! If you’d like to sign up
for the Premium Anatomy Course, go to

100 Replies to “Anatomy of the Pelvis – for Artists”

  1. 10% of all the views are people who actually want to learn. the other 90%… well lets just say they came for the slam dunk and nothing else

  2. Just a tiny nitpick, but I’m pretty sure a male skull is on the female skeleton. I could be completely wrong, but it looks like her frontal bone is really straight and vertical for a female, and her skull looks more square than round. Also poor skelly

  3. So Basically when a Feminazi starts talking about manspeading and you try to explain anatomy and she tells you to stop mansplaining you can link her to this video.

  4. You know I came here for 8.40 like everyone else, but this 3d anatomy sketch stuff is so so useful! I'm just in my first year of medical school and haven't done any human anatomy before, and this is really helping me conceptualise features. Thanks!

  5. Hi I'm here to recruit Skelly and Skella for the Skeleton War. Thank you.
    Many skeleton babies will be slam dunked through their pelvises. Including Skelly's, we're planning on using him as a sort of suicide bomber into the enemy's base.
    The skeleton horses provide the Skeleton Army with plenty of materials for glue to glue Skelly back together. You'll have him back in one piece.

  6. I love the look on Skella's face at 8:46. "Uh… I think normally pregnancies tend to be a little more protracted than that, but okay, point taken…"

  7. 6:32 don’t tell me this doesn’t look like one of those dinosaurs with horns if you flip it the other way

  8. me: ACTUALLY watching the video for information bc i need to draw this junk in biology
    this part -> 5:45 : comes on

    edit: 6:40 GOD WHY
    8:04 skella wants to chuck him out of a window
    9:26 skelly u don't HAVE a shirt

  9. which ones more painful
    those pick up lines
    or the torture that is drawing an anatomically accurate pelvis

  10. I can’t remember how long ago I saw him slam that baby but it stuck with me all those years and I still joke about it to my friends

  11. Omg I clicked on this just because I was wondering why YouTube recommend this to me and I didn’t recognize it was the BABY DUNKING VIDEO!

Leave a Reply

Your email address will not be published. Required fields are marked *